Woodgrain Aluminium Battens in Caloundra
A batten screen that reads as timber and behaves like aluminium - stable, non-combustible and at home in Caloundra.
Woodgrain Aluminium Battens in Caloundra
Strong sun is the quiet enemy in Caloundra. Subtropical UV fades an oiled or stained timber finish inside a season or two, and summer humidity feeds the mould that follows. woodgrain aluminium battens in woodgrain aluminium takes both out of play: the finish is UV-stable, the board is non-porous, and the only upkeep is an occasional wash.
Caloundra is coastal, so salt is part of the brief. We use marine-grade aluminium for exactly this exposure: it does not rust the way steel does, and it does not grey off and weather the way oiled timber does by the sea. A periodic fresh-water rinse clears salt build-up and keeps the finish doing its job.
We deliver into Caloundra on a scheduled run. The quote is in AUD, freight included, based on your drawings or measurements - so the figure you see is the figure you plan around.
Why woodgrain aluminium suits Caloundra
Lightweight spans
Lighter sections span further with fewer supports, simplifying screens, pergolas and ceilings.
Maintenance-free finish
No annual oiling. The baked woodgrain finish just needs an occasional wash.
Stays perfectly straight
Extruded aluminium will not bow, twist or cup the way timber battens do once they are exposed to sun and rain.
Consistent shadow lines
Uniform sections and accurate spacing give you the clean, repeating lines that make a batten screen look architect-designed.
Privacy with airflow
Adjust batten width and gap to balance privacy and cross-ventilation - ideal for Australian outdoor living.
Non-combustible substrate
Aluminium battens suit bushfire-prone settings and buildings with combustibility requirements.
Built for the subtropical climate
In Caloundra, you can expect warm, humid summers, mild dry winters and plenty of strong sun. Because our products are aluminium rather than wood, the baked woodgrain holds its colour through years of strong sun and summer storms.
The sublimated woodgrain finish is baked into an architectural powder coat and stays UV-stable through the strongest sun Queensland can throw at it, so your Caloundra batten screen keeps its timber look with no oiling, staining or repainting - just an occasional wash.
Where Caloundra projects use it
- Privacy screens and fencing infill
- Ceiling and soffit linings
- Facade blades and sun screening
- Feature walls and entry statements
- Pergolas, breezeways and patios
- Room dividers and commercial fitouts
Battens specifications
| Material | Extruded marine-grade aluminium |
|---|---|
| Finish | Sublimated woodgrain over powder coat |
| Common sizes | Range of square and rectangular sections |
| Fixing | Concealed clip and channel systems |
| Fire rating | Non-combustible substrate (AS 1530.1) |
| Maintenance | Occasional wash with mild detergent |
Finishes available in Caloundra
Every Woodonali finish is available across Caloundra and the Sunshine Coast.
Spotted Gum
warm mid-brown with subtle grey and chocolate streaks
View finish ›
Blackbutt
pale golden-brown with a fine, even grain
View finish ›
Western Red Cedar
rich reddish-brown with soft, straight grain
View finish ›
Tasmanian Oak
soft straw-blonde with a clean, consistent grain
View finish ›
Jarrah
deep red to rich russet brown
View finish ›
Merbau
warm reddish-brown with darker flecks
View finish ›
Walnut
deep chocolate brown with flowing grain
View finish ›
Teak
golden honey-brown with a fine grain
View finish ›Quotes for Caloundra projects
Send the rough coverage in m² (or the lengths you need) and your Caloundra postcode. We come back with an AUD figure that includes freight to Caloundra, usually within one business day.
Rather talk first? Call 1300 966 388 - we deal with Queensland owners, builders and architects every week.
Get a Caloundra quote
Battens in Caloundra: common questions
- How does the finish handle strong subtropical sun?
- The grain and colour are sublimated into a UV-stable powder coat rather than applied as an oil or stain, so the finish does not bleach within a season or two the way coated timber does.
- What happens in summer storm season?
- Wind-driven rain does not trouble a non-porous board - there is no swelling and no moisture uptake. Fixing details are specified per project so the whole system, not just the board, suits the exposure.
- How close to the water can it be installed?
- The marine-grade alloy suits genuine coastal exposure. For front-line positions we confirm fixings and detailing per project, because the fasteners and flashings matter as much as the board.
- What batten spacing should I use for privacy?
- Closer spacing gives more privacy and shade; wider spacing lets more light and breeze through. We can help you model the right gap for your aspect and sightlines.
- Can battens be used on ceilings and soffits?
- Yes. Lightweight aluminium battens are popular for eaves, alfresco ceilings and feature soffits because they will not sag or rot in the weather.
- Will the battens fade in the Australian sun?
- The sublimated finish is engineered for UV stability, so the woodgrain holds its colour far longer than oiled or stained timber.
- Are battens available for bushfire areas?
- The aluminium substrate is non-combustible. We can discuss detailing for your BAL requirements.
Other products in Caloundra
More Queensland areas we service
Planning a woodgrain aluminium project?
Talk to our Australian team for obligation-free advice, samples and pricing in AUD.