Ceiling & Soffit Linings
Warm timber-look linings for eaves, alfresco ceilings and feature soffits - lightweight aluminium that will not sag, rot or peel in the weather.
Ceiling & Soffit Linings
Woodonali ceiling and soffit linings extend the timber look overhead, where natural wood is most prone to weathering. Woodgrain aluminium boards and battens line eaves, alfresco and entry ceilings, and feature soffits, bringing warmth to a space without the sagging, splitting and repainting that timber linings suffer outdoors.
Aluminium is light, so linings span comfortably and install quickly, and the baked finish holds its colour even on north and west elevations that cop the most sun. The same finishes used on your cladding and battens can carry through to the ceilings for a fully resolved look.
From your dimensions to a finished ceilings job
-
Send the basics
Rough coverage, the finish you are leaning toward and your postcode. A real person replies, usually within one business day.
-
Quote in AUD
We price your profile, finish and quantities with freight included - no guessing from a per-metre headline that would only mislead.
-
Made on our line
Powder-coated, woodgrain sublimated, then cut and packed to your lengths - most orders ship in three to five days.
-
Supply or install
Delivered ready to fix, or installed by our team. On big runs the first batch ships early so the trades can start.
Why choose Ceiling & Soffit Linings
Will not sag or rot
Aluminium linings stay flat and sound where timber and fibre linings warp, stain and rot in weather.
Lightweight overhead
Lighter boards are safer and faster to install on ceilings and eaves.
Indoor-outdoor flow
Carry the same woodgrain from external soffits through to alfresco ceilings for a seamless transition.
UV-stable colour
Holds its grain and tone on sun-exposed eaves and elevations.
Non-combustible
An aluminium substrate suits eaves on bushfire-prone land.
Low maintenance
No repainting or re-oiling - just an occasional clean.
Where it is used
- Eaves and external soffit linings
- Alfresco and patio ceilings
- Entry and portico ceilings
- Carport and garage ceilings
- Commercial canopy soffits
- Feature interior ceilings
Specifications
| Material | Marine-grade aluminium boards and battens |
|---|---|
| Finish | Sublimated woodgrain over powder coat |
| Use | External soffits and alfresco/interior ceilings |
| Fixing | Concealed clip and channel systems |
| Fire rating | Non-combustible substrate (AS 1530.1) |
| Maintenance | Occasional wash with mild detergent |
Available finishes
Pick the timber look that suits the elevation - every finish shown here can be supplied on ceilings.
Spotted Gum
warm mid-brown with subtle grey and chocolate streaks
View finish ›
Blackbutt
pale golden-brown with a fine, even grain
View finish ›
Western Red Cedar
rich reddish-brown with soft, straight grain
View finish ›
Tasmanian Oak
soft straw-blonde with a clean, consistent grain
View finish ›
Jarrah
deep red to rich russet brown
View finish ›
Merbau
warm reddish-brown with darker flecks
View finish ›
Walnut
deep chocolate brown with flowing grain
View finish ›
Teak
golden honey-brown with a fine grain
View finish ›Pricing ceilings
Every job is quoted individually in AUD - profile, finish, quantities and freight all move the number, so a published per-metre price would only mislead. Send the basics and we will give you a figure you can actually build a budget on.
Or call 1300 966 388 and talk it through with the team, 7am–5pm Mon–Fri.
Get a quote in AUD
Common questions
- Can I line my alfresco ceiling with aluminium?
- Yes - it is one of the most popular uses. Aluminium linings will not sag or rot in the weather and keep their colour under strong sun.
- Will the ceiling match my cladding?
- It can. The same woodgrain finishes run across cladding, battens and linings so the project reads as one design.
- Is it suitable for eaves in bushfire areas?
- The aluminium substrate is non-combustible, which is an advantage for eaves and soffits on bushfire-prone land.
- How are the linings fixed?
- Concealed clip and channel systems give a clean underside with no visible fasteners.
Planning a woodgrain aluminium project?
Talk to our Australian team for obligation-free advice, samples and pricing in AUD.